Rule 20DA Bilge Pump 800 GPH Marine 12V DC 3/4" Submersible Replaces 20R

Description

800GPH Standard Bilge Pump - 12V
Customers talk about flow, they want the water out of the bilge, and
fast. Improved design and performance means that our next generation 800GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.
Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.
We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.
We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting started
Dimensions 4.4" (112mm) high x 2.9" (74mm) width x 2.5" (64mm) depth (not including discharge port)
Features:
Non-automatic - used with a panel switch or Rule float switch
Submersible and Ignition Protected
High efficiency, low amp motor
Stainless-steel shaft
Specifications:
Gallons Per Hour: 800
Operation: Non-Automatic
Outlet Size: 3/4'
Volts: 12V