March AC-5C-MD 115v Replacement KoolAir PM1000-115 Marine Air Conditioning Pump!

Description

ETL Listed Recognized Component (Intertek)
THIS PUMP IS 115 VOLT ONLY
Perfect economical replacement for March AC-5C-MD Pump 115 volt model Air Conditioning Pump.
100% SATISFACTION
GUARANTEED
FREE SHIPPING!
KOOLAIR PUMP Replaces MARCH
AC-5C-MD
Pump - DROP IN PLACE for all March
AC-5C-MD
AC Coolant Pumps - Comes with Standard & Upgraded Marine Base
Economical March Pump "Drop In Replacement" Option - Save $ Today!
THIS PUMP IS 115 VOLT ONLY
AC-5C-MD March Pump Replacement
THIS IS THE ONLY MARINE AC COOLANT PUMP THAT HAS RUN DRY CAPABILITY!
Product Information
-
If the Pump is applied correctly, it will be the LAST one you ever purchase!
1000 GPH
1″ FPT Inlet, 1/2″ MPT Outlet
27 Feet of Head @ 11.7 PSI
115Volt
1/8 HP
MODEL:
PM1000-115
Run Dry Protection is how to withstand thermal overloads without failure. When cooled, the pump will resume operating normally.
Materials exposed to the solution (wet end) are Reinforced Polypropylene, Buna N and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Polysulfone, and the Cord will also come in contact with the solution.
The inlet connection is a 1” female pipe thread and the outlet is ½” male pipe thread.
Includes fully integrated, heavy duty, Epoxy coated marine base, as well as the original base.
The motor is a 1 Phase 115V, 1/8 Horsepower motor, running on either 50 or 60 HZ.
Maximum internal pressure is 50 PSI and the maximum liquid temperature is 180 Fahrenheit or 82 Celsius.
The hardened Carbon bushing allows for extended run dry time as a result without any damage to the pump head. See the parts diagram for assembly instructions. Trimming of the impeller is possible to modify flows or compensate for liquids of higher viscosity.
OPERATION:
The pump is not self-priming, and requires a flooded suction.
The pump has run dry and thermal overload protection. In a run dry situation the pump will shut down.
Simply let it cool down or hose it down to assist the cooling.
INTERTEK ETL LISTING
The ETL Listed Mark indicates to distributors, retailers and customers that your product has been tested by Intertek and found in compliance with accepted national standards.
What is the difference between the ETL Listed Mark and those issued by our competitors?
Certification marks – like the ETL Listed Mark – demonstrate compliance to the requirements of widely accepted product safety standards, as determined through independent testing and periodic follow-up inspections by an NRTL. It is the quality of customer service and of the capabilities provided by the testing laboratory issuing each certification mark that sets them apart.
Approximate
Shipping Weight: 10 lbs
Voltage: 115