BBDS1 Black Box Fishfinder w/Bott. Disc.

Description

The BBDS1 is a new network fish finder for NavNet 3D and NavNet TZtouch that features an all new bottom discrimination function| as well as the FDF (Furuno Digital Filter) capability of the DFF1. The BBDS1 determines the bottom structure and separates them into the following categories: mud| sand| gravel| and rock. This is achieved by analyzing echo characteristics from the bottom components such as particle size and hardness.
Connect the BBDS1 to your NavNet 3D or NavNet TZtouch network and get ready for your NavNet system to provide you with valuable information to locate rich fishing grounds| boosting your catch.
There are two bottom discrimination display modes to select from| Standard Mode and Probability Mode. In Standard Mode| the most probable materials on the bottom (mud| sand| gravel or rock) are indicated in either graphic mode or a 4-color bar on the bottom of the display.
Because bottom material can change frequently and can sometimes be difficult to identify| Probability Mode shows you what material the bottom has the greatest chance of consisting of by displaying the possible bottom materials proportionally within the 4-color bar.
Standard Features:
Frequency: 50/200 kHz alternately transmitted
Output Power: 600 W/1 kW
Power Supply: 12-24 VDC: 1.1-0.4 A (in output power of 1 kW)
Temperature : -15 to + 55 degree Celsius (in operation)
Relative Humidity: 93% at 40 degree Celsius
Waterproofing: IP20 (not waterproofed)
Required Conditions for Bottom Discrimination
Detection Range: 5-100 m
Boat Speed: 0-10 kn
Transducer mounting: Thru-hull or transom mount only
MFD8/12/BB software: v2.06 or later
Notes:
1. The result shown by this function may sometimes be different from the actual bottom components.
2. For best performance| do not use in-hull mounted transducers with the BBDS1.
3. The BBDS1 may show an incorrect ground discrimination result| especially when there is a big fish school right under the boat. This is because enough echoes may not be received from the bottom.
4. Materials such as shell| coral| or a sunken ship are indicated as the most similar material from the four bottom categories: mud| sand| gravel| or rock| according to reflected echoes.
5. Auto mode is automatically activated when the bottom discrimination function is turned on. (Manual mode is not selectable.)
6. The BBDS1 is not compatible with NavNet 1 or NavNet vx2.
7. Appropriate Furuno Transducer recommended for best resluts
Transducer options (see table below):
Bottom Discrimination Fish Finders will function as a standard Fish Finder with other transducers| however| the ground discrimination mode will be disabled
Due to power and frequency requirements for bottom discrimination signal processing| in-hull or "shoot-thru" transducers are not compatible
These Transducers WILL Work With Bottom Discrimination
Transducer
Descritpion
FCV627
FCV587
BBDS1
520-PSD
600w Plastic Thru-hull
*
*
*
520-5MSD
600w bronze Thru-hull
*
*
*
525-5PWD
600W Transom Mount
*
*
*
525STID-MSD
600w Bronze Thru-Hull Multi Sensor
*
*
*
525STID-PWD
600W Transom Mount Multi-Sensor
*
*
*
CA50/200-12M
1
1kW Bronze Thru-Hull
*
*
CA50/200-1T
1
1kW Rubber Coated
*
*
1
MB1100 us Required for this Transducer
These Transducers
WILL NOT
Work With Bottom Discrimination
Transducer
Description
FCV627
FCV587
BBDS1
ST-01PTB
Plastic Transom Clip-On Speed and Temp Sensor (6-Pin) with Bracket
*
*
*
ST-02MSB
Bronze Thru-Hull Speed and Temp Sensor (6-Pin)
*
*
*
520-IHD
Plastic In-Hull Transducer| 600W (10-Pin)
*
*
*
525STID-MSD7
Bronze Thru-Hull Multisensor with 7 Inch Stem| 600W (10-Pin)
*
*
*
525T-BSD
Bronze Thru-Hull Transducer with Temp| 600W (10-Pin)
*
*
*
525TID-BHD
Bronze Thru-Hull Transducer with Temp and High-Speed Fairing Block| 1 kW (10-Pin)
*
*
525TID-TMD
Transom Mount Transducer with Temp| 1kW (10-Pin)
*
*
525T-LTD/12
Bronze Thru-Hull Transducer with Temp| 600W (10-Pin)| 12° Tilted Element
*
*
*
525T-LTD/20
Bronze Thru-Hull Transducer with Temp| 600W (10-Pin)| 20° Tilted Element
*
*
*
525T-PPD
Plastic Puck Transducer with Temp| for Trolling Motors| 600W (10-Pin)
*
*
*
526TID-HDD
Bronze Broadband Thru-Hull Transducer with Temp| Built-in Diplexer and Hi-Speed Fairing Block| 1kW (10-Pin)
*
*
AIRB1641210F
Bronze Thru-Hull| Low Profile Transducer with Temp| 1kW (10-Pin)| 12° Tilted Element
*
*
AIRB1642010F
Bronze Thru-Hull| Low Profile Transducer with Temp| 1kW (10-Pin)| 20° Tilted Element
*
*
527ID-IHD
Urethane In-Hull Transducer| 1kW (10-pin)| Broadband
*
*
556TID-HDD
Stainless Steel Thru-Hull Transducer with Temp and Fairing Block| 1 kW (10-Pin)
*
*
CA200B-5
Bronze Thru-Hull Transducer| Type 200B-5| 1kW (No Plug)
*
*
CA200B-5S
Rubber Coated Transducer| Type 200B-5S| 1kW (No Plug)
*
*
CA50B-6B
Rubber Coated Transducer| Type 50B-6B| 1kW| 15m Cable (No Plug)
*
*
CA50B-6G
Rubber Coated Transducer| Type 50B-6G| 1kW (No Plug)
*
*