1200W DC-DC Converter 12V-60V 12V 36V to 12V-80V 20A 24V 48V 72V Step-up Power

Description

Product Overview
1200W DC-DC Converter 12V-60V 12V 36V to 12V-80V 20A 24V 48V 72V Step-up Power
Detail
Module Properties: non-isolated step-up module (BOOST)
Input voltage: 10 - 60V (Jump cap switch)
Input Current: 20A
Quiescent current: 15mA (12V to 20V, the output voltage the higher ,the current will increase )
Output voltage: 12-80V continuously adjustable
Output Current: 20A MAX than 18A, please enhance heat dissipation (input, output pressure related, the greater the pressure the smaller the output current)
Constant Range: 20A
Output Power:
Input voltage x 20A, such as: input 12V x 20A = 240W, input 24V x 20A = 480W,
Enter 36V x 20A = 720W, input 48V x 20A = 960W, input 60V x 20A = 1200W
This module can 't be used in parallel.
The current per module can be adjusted to 15A.
Working temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150KHz
Conversion efficiency: up to 95% (efficiency and input and output voltage, current, pressure related)
Overcurrent protection: Yes (with reduced flow adjustment, adjustable output current limit, current exceeds the current limit, the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current will be.)
Short circuit protection: Yes (input 20A fuse) double short circuit protection, the use of more security.
Input reverse polarity protection: None, (if necessary, please enter the string into the diode)
Output Counter filling: Yes, for charging plus blocking diode is not required.
Installation: four 3mm screws
Connection: solderless terminals output
Dimensions: 85mm x63mm x 64mm(LxWxH)
Instructions:
1. Default input voltage range: 12-60V DC
2. Output voltage and current regulation method:
(1) Adjust the output voltage: adjust the V-adj potentiometer, according to the actual needs of the load device voltage, adjusted to match the output voltage that is strong.
(2) Adjust the output current: counterclockwise direction I-adj potentiometer about 30 laps, the output current to a minimum, and then connected to the load device, adjust the potentiometer to the required current can be.
(3) for the battery charge, the battery after the discharge, and then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining The more charge, the smaller the charge current.
(4) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune.
Package Included:
1 x 1200W 20A DC Converter Boost Step-up Power Supply Module
Shipping Policy
Payment Mathord
Returns Policy
Shipping Policy
1.Items are shipped from china.we will send out within 1 bussiness day after receive the payment.
2.We only ship to ebay confirmed address. So before bidding,  please kindly verify your ebay address.
3.
Shipping to USA takes 8-18 days in normal condition by E-packet with tracking number.
Shipping to most other countries takes about 12-30 days via Economy Int'l Airmail.
Less than , without free tracking number,if you request tracking number,please send ebay message to us.
Over ,with tracking number free.The shipping time depends on your location and local postal service,as well as the  weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you not get the package.
4.
Express shipping: DHL/FEDEX/EMS,Extra  -- will be charged for the first 500 grams for most countries. Contact us if  you need this service.
Payment Mathord
PayPal payment accepted only.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please send ebay message to us immediately. Returns accepted within 30 days of delivery date.
3. Please send ebay message to us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.