.1200W DC-DC Converter 12V-60V 12V 36V To 12V-80V 20A 24V 48V 72V Step-up Power.

Description

.1200W DC-DC Converter 12V-60V 12V 36V To 12V-80V 20A 24V 48V 72V Step-up Power.
DESCRIPTION
.1200W DC-DC Converter 12V-60V 12V 36V To 12V-80V 20A 24V 48V 72V Step-up Power.
Features:
This module can 't be used in parallel.
The current per module can be adjusted to 15A.
Working temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150KHz
Conversion efficiency: up to 95% (efficiency and input and output voltage, current, pressure related)
Overcurrent protection: Yes (with reduced flow adjustment, adjustable output current limit, current exceeds the current limit,
the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current will be.)
Short circuit protection: Yes (input 20A fuse) double short circuit protection, the use of more security.
Input reverse polarity protection: None, (if necessary, please enter the string into the diode)
Output Counter filling: Yes, for charging plus blocking diode is not required.
Specifications:
*Module Properties: non-isolated step-up module (BOOST)
*Input voltage: 10 - 60V (Jump cap switch)
*Input Current: 20A
*Quiescent current: 15mA (12V to 20V, the output voltage the higher ,the current will increase )
*Output voltage: 12-80V continuously adjustable
*Output Current: 20A MAX than 18A, please enhance heat dissipation (input, output pressure related, the greater the pressure the smaller the output current)
*Constant Range: 20A
*Output Power:
Input voltage x 20A, such as: input 12V x 20A = 240W, input 24V x 20A = 480W,
Enter 36V x 20A = 720W, input 48V x 20A = 960W, input 60V x 20A = 1200W
*Installation: four 3mm screws
*Connection: solderless terminals output
*Dimensions: 85mm x63mm x 64mm(LxWxH)
Package Included:
1PCS 1200W 20A DC Converter Boost Step-up Power Supply Module
Instructions:
1. Default input voltage range: 12-60V DC
2. Output voltage and current regulation method:
(1) Adjust the output voltage: adjust the V-adj potentiometer, according to the actual needs of the load device voltage, adjusted to match the output voltage that is strong.
(2) Adjust the output current: counterclockwise direction I-adj potentiometer about 30 laps, the output current to a minimum, and then connected to the load device, adjust the potentiometer to the required current can be.
(3) for the battery charge, the battery after the discharge, and then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining The more charge, the smaller the charge current.
(4) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune.
POLICES
Shipping
Payment
WARRANTY
We only
ship to confirmed ebay Order addresses.
Please comfirm that your Order address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.
On Oct 27, 2022 at 08:26:32 PDT, seller added the following information: