0.75L 125 PSI Pre-Pressurized Accumulator Tank Pressure Water Pump for Boat RV

Description

Amarine Made
0.75L 125 PSI Pre-Pressurized Accumulator Tank Pressure Water Pump for Boat RV US Stock
Connect Accumulator Tank to outlet side of water pump for best results
Accumulator tanks hold a reservoir of air and water down stream from the pump
Longer pump life, lower battery drain,reducing noise and providing a more consistent water supply.
Internal rubber membrane eliminates maintenance and simply fitted to new or existing systems
Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery
Specification
Inlet/Outlet Dia:1/2" MNPT
Volume:0.75 Liter(25 FL OZ)
Water psi:Max 125 PSI (8.6 BAR)
Pre-charge pressure:10 PSI(0.87 BAR)
Air Fill Vale:standard automotive style tire valve
Applications:Boat,Marine, RV,Caravan,ect
★Please Note
1.Relieve air psi prior to disassembly
2.Do not use to pump flammable fluids,gasoline,kerosene fuel oil
3.Do not use pump in a explosive environment or use where flammable vapors are present
4.Petrol or fluids with flash point below 37°C(98°F), explosion or death may occur.
5.The accumulator tank comes pre-pressurized at 10 PSI. For optimal usage, please set accumulator tank to ~3 PSI below your water pump's cut-in pressure and make sure it is connected to the outlet of the pump
6.Do not over pressurize tank. Pressures over 125PSI(8.6BAR) may rupture tank and cause personal injury.